Table of Contents
Advertisement
Available languages
Available languages
Application tool
Profile sander
Bi-metal plunge cut
saw blade for wood
and metal
HCS plunge cut
saw blade for wood
Bi-metal plunge cut
saw blade, hard-
wood
TC plunge cut saw
blade, metal
Bi-metal plunge cut
saw blade for wood
and metal
TC-Riff segment
saw blade
Diamond-Riff seg-
ment saw blade
TC-Riff Delta plate Mortar, concrete residue,
TC-Riff grout and
mortar remover
HCS multi blade
Bosch Power Tools
Material
Application
fleeces for cleaning and for texturing wood, removing rust
from metal and for keying varnish, polishing felt for pre-
polishing
Wood, pipes/profiles,
Convenient and efficient sanding of profiles up to a dia-
paint, varnish, filler, metal
meter of 55 mm;
red sanding sheets for sanding wood, pipes/profiles, var-
nish, filler and metal
Softwood, soft plastics,
Small separating cuts and plunge cuts;
plasterboard, thin-walled
example: Cutting a recess for sockets, cutting a copper
aluminium profiles and
pipe so that it is flush with a surface, making plunge cuts in
non-ferrous metal pro-
plasterboard
files, thin sheet metal,
Delicate adaptation work in wood;
non-hardened nails and
example: Sawing recesses for locks and fittings
screws
Wood-based materials,
Separating cuts and plunge saw cuts;
soft plastics
including sawing close to edges, in corners and in difficult-
to-reach areas;
example: Thin plunge cut in solid wood for installing a
ventilation grille
Hardwood, laminated
Plunge cuts in laminated boards or hardwood;
boards
example: Installation of skylights
Metal, extremely abrasive
Plunge cuts in extremely abrasive materials or metal;
materials, fibreglass, plas-
example: Cutting kitchen front covers, easy cutting
terboard, cement-bonded
through hardened screws, nails and stainless steel
fibreboard
Softwood, hardwood,
Plunge cuts in laminated boards or hardwood;
veneered boards, plastic-
example: Shortening door frames, recesses for a shelf
coated boards, non-
hardened nails and
screws
Cement joints, soft wall
Making cuts near edges, in corners or in difficult-to-reach
tiles, fibreglass-reinforced
areas;
plastics, porous concrete
example: Removing joints between wall tiles for improve-
ment work, cutting recesses in tiles, plasterboard or
plastics
Cement joints, soft wall
Precise routing and cutting of tile/joint material, epoxy
tiles, epoxy resin, fibre-
resin and fibreglass-reinforced plastics;
glass-reinforced plastics
example: Producing small cut-outs in soft wall tiles and
routing recesses in fibreglass-reinforced plastic
Rasping and sanding on a hard surface;
wood, abrasive materials
example: Removing mortar or tile adhesive (e.g. when re-
placing damaged tiles), removing carpet adhesive residue
Mortar, joints, epoxy
Routing and cutting of joint material and tile material, as
resin, fibreglass-rein-
well as rasping and sanding on a hard surface;
forced plastics, abrasive
example: Removing tile adhesive and joint mortar
materials
Roofing felt, carpets, arti-
Fast and precise cutting of soft material and flexible abras-
ficial turf, cardboard, PVC
ive materials;
flooring
example: Cutting carpets, cardboard, PVC flooring, roof-
ing felt, etc.
English | 19
1 609 92A 4DA | (08.10.2018)
Advertisement
Table of Contents
