Table of Contents
Advertisement
6.2 Pedal/throttle/ewastegate learning
Pedal sensor voltages range
Pedal voltages must be in the below voltage ranges to able to success the learning.
Off pedal (0%)
Min value
(Volts)
Pedal sensor
1
RAW 1
Pedal sensor
1,8
RAW 2
Pedal/throttle learning procedure:
1) Power off the car and press full throttle pedal while main switch is off.
2) Keep full throttle pedal, Turn ON main switch and keep full throttle pedal position for 6-7 seconds.
3) Release the throttle pedal (= remove completely the foot from it) and wait for the end of the
automatic pedal/throttle learning procedure (motorized throttles are going
MAX –> IDLE positions).
4) Make power cycle when learning is succeeded
MR18 F3R Engine user manual V03, February 2021
Full pedal (100%)
Max value
Min value
(Volts)
(Volts)
3
3,1
4
0,2
Duration approximately 30 seconds
It is possible to hear the motorized throttles during calibration. If
nothing
happens,
pedal/throttle learning procedure again.
Max value
(Volts)
4,9
1,75
you
must
proceed
successively
to MIN –>
to
the
complete
Page 19 sur 29
Advertisement
Table of Contents
