Hach DR 6000 Basic User Manual page 167

The Wavelength Scan is complete, if
• the graph is shown full-size,
• the scaling of the x-axis occurs automatically,
• the Cursor functions in the vertical navigation bar are
highlighted.
• a sound is emitted
• To save the scan, press Options > Store symbol.
Time course of absorbance/transmittance
The Time Course mode is used to collect data in either absorbance or
transmittance for a user-specified length of time. This data can be
displayed in either a graph or a table.
Time course setup parameters
1. Press Time Course mode in the Main Menu.
2. Press Options to configure parameters.
Table 6 Time course options
Options Description
More For further options
Folder icon To store the scan data
To input the total time for data collection and the time interval
Time & Interval
between the collection of data points
λ
To input the wavelength setting
To display readings in absorbance, transmittance or
View Table concentration. This can be changed after sample data is
collected
This functions as a stopwatch. It helps to make sure that the
steps of an analysis are correctly timed (e. g. reaction times,
Timer icon wait times, etc., can be exactly specified). When the
specified time has elapsed, a sound is emitted. The use of
the timer has no influence on the reading program.
English 167