Transportation; Storage; Technical Data - McCulloch CS 340 Operator's Manual

Hide thumbs Also See for CS 340:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
1. Start the product and let it run at 3/4 speed. Point the
nose of the guide bar at a light color surface almost
20 cm (8 in) away.
2. After 1 minute of running, a line of oil shows on the
light surface.
3. If you cannot see the line of oil after 1 minute, clean
the oil channel in the guide bar. Clean the groove in
the edge of the guide bar. Make sure the guide bar
nose sprocket turns freely and that there are no
blockages in the lubrication hole. Clean and lubricate
the tip sprocket.
Put the transportation guard on the cutting
attachment during transportation to prevent injuries.
Always put the product away safely when not in
operation. Leakages and fumes from the product can
touch sparks, naked flames from electrical
equipment, electrical mowers, relays/switches,
boilers and more.
Always save fuel in an approved container.
Empty the fuel tank and the chain oil tank when the
product is in storage for longer periods of time.
Discard used fluids correctly.
Engine specifications
Cylinder displacement
Spark plug
Electrode gap
Fuel tank volume
Idle speed
Power output at 9000 min
Emission durability period
Noise and vibration data
Equivalent vibration levels, a
1
Equivalent vibration level, according to ISO 22867, is calculated as the time-weighted energy total for vibration
levels under various working conditions. Reported data for equivalent vibration level has a typical statistical
dispersion (standard deviation) of 1 m/s
24

Transportation

Technical data

-1
1
front handle
hveq
2
.
4. Start the product and let it run at 3/4 speed. Point the
nose of the bar at a light color surface almost 20 cm
(8 in) away.
5. After 1 minute of running, a line of oil shows on the
light surface.
6. If you cannot see the line of oil after 1 minute, speak
to your approved dealer.
Make sure that the product can not move during
transportation.

Storage

Put the transportation guard on the cutting
attachment during storage to prevent injuries.
Remove the spark plug cap from the spark plug and
engage the chain brake before storage.
unit
3
cm
mm (in)
3
cm
-1
min
kW
h
2
m/s
CS 340
CS 380
(P02138MC)
(P02138MC)
38
38
Champion RCJ
Champion RCJ
7Y
7Y
0,5 (0.02)
0,5 (0.02)
250
250
2800-3200
2800-3200
1,4
1,4
50
50
5,3
5,3
280 - 007 - 14.10.2019

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cs 380

Table of Contents