Transportation And Storage; Technical Data - McCulloch CS410 Elite Operator's Manual

The engine starts but stops again
Product part to examine
Fuel tank
Carburetor
Air filter
Fuel filter

Transportation and storage

• For storage and transportation of the product and
fuel, make sure that there are no leaks or fumes.
Sparks or open flames, for example from electrical
devices or boilers, can start a fire.
• Always use approved containers for storage and
transportation of fuel.
• Empty the fuel and chain oil tanks before
transportation or before long-term storage. Discard
the fuel and chain oil at an applicable disposal
location.
• Use the transportation guard on the product to
prevent injuries or damage to the product. A saw
chain that does not move can also cause serious
injuries.
• Remove the spark plug cap from the spark plug and
engage the chain brake.
• Attach the product safely during transportation.

Technical data

Engine
Cylinder displacement, cm
Stroke, mm
Idle speed, rpm
Maximum engine power acc. to ISO
8893, kW/hp@rpm
Ignition system
Spark plug
1733 - 002 - 23.11.2021
Possible cause
Incorrect fuel type.
The idle speed is not correct.
Clogged air filter.
Clogged fuel filter.
Transportation and storage
Technical data
CS410 Elite
3
40.9
31
2900
1.6/2.2@9000
NGK BPMR 7A/ Champion RCJ 7Y/
Husqvarna HQT-1R
Action
Drain the fuel tank and fill with cor-
rect fuel.
Speak to your servicing dealer.
Clean or replace the air filter.
Replace the fuel filter.
To prepare your product for long-term
storage
1. Stop the product and let it become cool before you
disassemble it.
2. Disassemble and clean the saw chain and the
groove in the guide bar.
CAUTION:
guide bar are not cleaned, they can
become rigid or blocked.
3. Attach the transportation guard.
4. Clean the product. Refer to
for instructions.
5. Do a complete servicing of the product.
CS450 Elite
45.7
33
2700
2.0/2.7@9000
NGK BPMR 7A/ Champion RCJ 7Y/
Husqvarna HQT-1R
If the saw chain and
Maintenance on page 22
33