Stanley IntelliMeasure 0-77-018 User Manual page 3

Figure 2
Measurement
mode indicator
Active measurement
OPERATING INSTRUCTIONS
Battery installation:
Taking Measurements:
1. Press and release the "Read" button. The
measurement is displayed on the LCD screen.
IntelliMeasure
edge of the unit (Measurement Zero Point).Thus,
for maximum consistency of measurement it
is best to place the back of the unit onto a firm
vertical surface, such as a wall. Ensure that
IntelliMeasure
surface being measured and pointing towards it.
2. When repeating a reading for confirmation, make
sure IntelliMeasure
still perpendicular to the surface being measured.
3. It is important to ensure that the area between
IntelliMeasure
is clear of all obstructions as these will affect the
accuracy of the reading. Ensure the distance to be
measured is clear of obstacles.
Previous measurement(s)
takes readings from the bottom
®
is placed perpendicular to the
®
is still at the same point and
®
and the surface to be measured
®
Units
GB
3