Haier AD142AMBAC Instruction Manual page 6

SAFETY PRECAUTION
The machine is adaptive in following situation
1. Applicable ambient temperature range:
Indoor
Cooling
Outdoor
Indoor
Heating
Outdoor
2. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent
or a similar qualified person. An extend cord is not recommended, the requirement of the
power supply cord is H07RN-F 3G 2.5mm
3. If the fuse on PC board is broken please change it with the type of T. 3.15A /250V.
4. The waste battery shall be disposed properly.
5. The wiring method should be in line with the local wiring standard.
6. Use copper wire only. The connecting cable should be H07RN-F 2x2.0mm
0.75mm 2 . (for heating pump unit) or H07RN-F 2x2.0mm
cooling only unit). The power cable should be H07RN-F 3G 2.5mm
have got the European allthentication certificate.
7. The power supply connects from the indoor side.
8. The breaker of the air conditioner should be all-pole switch; and the distance between its
two contacts should be no less 3mm.
9. The indoor unit installation height is at least 2.5m.
Note:
Part of the power supply of the air conditioner are not prepared because of the requirement
of the dealer, the power supply should be provided for oneself.
Maximum:
D.B / W.B
D.B / W.B
Minimum:
Maximum:
D.B / W.B
Minimum:
D.B
Maximum:
D.B
Minimum:
D.B
Maximum:
D.B / W.B
Minimum:
D.B / W.B D.B / W.B
2 (suitable for installation in European region)
5
c c
32 / 23
c c
18 / 14
c
c
43 / 26
c
15
c
27
c
15
c c
24 / 18
c
c
-7 / -8
2 , H05RN-F 4G
, H05RN-F 2G 0.75mm
2
2 . All the cables shall
2 . (for