Haier AD142AMBAC Instruction Manual page 14

OPERATION
Comfortable Sleep
At night, before going to bed you
can press down the SLEEP button
on the controller and the air-
conditioner will run by the
comfortable sleeping mode to
make you sleep more comfortable.
Press SLEEP button once to make the air conditioner have the previous-set sleep time (first power-
on is "1h"), the sleep symbol will appear. Press time button
hours. Each press of
setting part, "OFF" appears in "TIMER OFF" display part and timer-off time; press SLEEP button
again to cancel sleep function, the sleep symbol diappears.
In cooling, dehumidifying mode
One hour after sleeping operation start, the temp. is 1 C higher than the setting one. After another
hour the temp. rises 1 C and then run continuously for another 6 hrs' and then close. The actual
temp. is higher than the setting one which is to prevent from being too cool to your sleep.
In heating mode
One hour after start up, the temp. decrease 2 C lower than the setting one. After another hour
decrease by more 2 C.
The temperature will automatically rise by 1 C after another 3 hrs' operation, and then automatically
close after 3 hrs' continuous operation. The actral temperature is lower than the setting one which
is to prevent from being too hot to your sleep.
Note:
In AUTO mode, unit will run in SLEEP function according to the operation mode.
After setting SLEEP function, it is forbidden to calibrate clock.
If the set sleep-time does not reach 8 hours, the unit will stop operation automatically after set
time is complete.
Set "TIMER-OFF" function first, then set SLEEP, and the sleep-set is performance; set TIMER-
ON function first, the sleep function can only be set before TIMER-ON; if set theSLEEP function
first, the TIMER function can not be set.
SETTING T
1 hr
decrease 2 C
1 hr
decreases 2 C
3 hrs
SLEEP RUN BEGINS
Heat mode
/ , the time increases/reduces 1 hour and "xh" appears in the humidity
SHUT DOWN
about 3 hrs
increase1 C
SLEEP RUN STOPS
AM
/ , you can choose the time in 1~8
SLEEP RUN BEGINS
1 hr
increase 1 C
1 hr
SETTING T
Cooling mode
13
MODE FAN SWING
TEMP
CLOCK SET
SET
TIMER SLEEP
C
FILTER RESET
OFF
RESET
AM
ON/OFF
SLEEP RUN STOPS
about 6 hrs
increase 1 C
SHUT DOWN