Humidifying Filter / Humidifying Tray - Sharp KI-G75EU Operation Manual

HUMIDIFYING FILTER / HUMIDIFYING TRAY

How to remove
the Humidifying
Filter and Tray.
How to attach the Humidifying
Filter and Tray.
After maintenance, correctly reattach
the parts.
Rinse with plenty of water.
• Do not remove the Float, the Tray Panel
and the Rollers. If they come off, refer to
below.
NOTE How to clean hard to remove dirt.
Kitchen detergent
(only Humidifying tray)
1. Fill the tray half-way with
water.
2. Add a small amount of
1
kitchen detergent.
2
3
How to install the Float, the Tray Panel and thr Roller
Float
3. Insert the tab on
the other side of the
float into the hole.
2. Insert the tab of the
float into the hole.
KI-G75EU_10_languages_A.indb 13
①
②
Citric acid
(available at some drugstores)
2 1/2 cups of water
Soak for 30
minutes.
Rinse off the kitchen detergent or the descaling solution with clean water.
1. Insert the Float un-
der this tab.
Tab
Float
Cross-Section view
Tray Panel
100% bottled lemon juice
3 cups of water
3 teaspoons
Soak for 30 minutes.
(When using lemon juice as your
descaling solution, allow for more
soak time.)
Tray Panel
Roller
EN-13
②
①
Float
Roller
with no pulp
1/4 cup
Click
Click
Click
2019-02-18 10:51:56