Philips HP6511 Manual page 13

 Press the release button (1) and pull the epilating head off the
appliance () (Fig. ).
 Hold the appliance in your hand and insert a screwdriver into the
opening in the bottom of the epilator (1). Then move the
screwdriver upwards () to open the housing (Fig. 15).
 Pull the two housing halves apart with your thumbs until the snap
connections break (Fig. 16).
5 Remove all components (motor unit and the printed circuit board
unit) from the housing halves.
6 Insert a screwdriver between the plastic battery holder and the
batteries (Fig. 17).
7 Remove the batteries from the plastic battery holder and the
printed circuit board (Fig. 1).
Do not try to reassemble the appliance in order to run it from the
mains. This is dangerous (Fig. ).
guarantee & service
If you need information or if you have a problem, please visit the Philips
website at www.philips.com or contact the Philips Customer Care
Centre in your country (you find its phone number in the worldwide
guarantee leaflet). If there is no Customer Care Centre in your country,
go to your local Philips dealer or contact the Service Department of
Philips Domestic Appliances and Personal Care BV.
troubleshooting
Problem
Reduced
epilating
performance.
Possible cause
You moved the
epilator in the
wrong direction.
Solution
Move the appliance against the
direction of hair growth.
EnglisH
1