Specifications - Makita DCG140 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Max feed force
Stroke
Overall length
Standard battery cartridge
Net weight
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change with-
out notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
This tool is intended for applying caulking material to
surface.
Noise
The typical A-weighted noise level determined accord-
ing to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745:
Vibration emission (a
Uncertainty (K) : 1.5 m/s
NOTE: The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration emission value may
also be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
Model
Feed speed
with short (300 ml) holder
with long (600 ml) holder
with short (300 ml) holder
with long (600 ml) holder
with short (300 ml) holder
with long (600 ml) holder
) : 70 dB (A) or less
pA
2
) : 2.5 m/s or less
h
2
DCG140
BL1415 / BL1430 /
BL1415N BL1430B /
BL1440 /
BL1450 /
BL1460B
2.0 kg 2.2 kg
2.4 kg 2.6 kg
D.C. 14.4 V
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Cordless Caulking Gun
Model No./ Type: DCG140, DCG180
Conforms to the following European Directives:
2006/42/EC
They are manufactured in accordance with the following
standard or standardized documents:
EN60745
The technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and instruc-
tions may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for
future reference.
5 ENGLISH
DCG180
5,000 N
0 - 28 mm/s
214 mm
350 mm
404 mm
538 mm
BL1815 /
BL1815N /
BL1820 /
BL1820B
2.1 kg
2.5 kg
D.C. 18 V
31.12.2013
Yasushi Fukaya
Director
BL1830 /
BL1830B /
BL1840 /
BL1840B /
BL1850 /
BL1850B /
BL1860B
2.3 kg
2.7 kg