Cisco Aironet CB20A Configuration Manual page 60

Setting Network Security Parameters
Choose either the Static Password (Windows NT/2000, LDAP) or the One Time Password option,
Step 9
depending on your user database.
Step 10 Perform one of the following:
•
•
Click OK three times to save your settings. The configuration is complete.
Step 11
Refer to
Step 12
Enabling EAP-SIM
Follow these steps to enable EAP-SIM.
For EAP type, choose SIM Authentication.
Step 1
Click Properties. The SIM Authentication Properties screen appears (see
Step 2
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
5-60
If you selected the Static Password (Windows NT/2000, LDAP) option in
If you selected the One Time Password option in
boxes to specify the type of tokens that will be supported for one-time passwords:
– Support Hardware Token—A hardware token device obtains the one-time password. You
must use your hardware token device to obtain the one-time password and enter the password
when prompted for your user credentials.
Support Software Token—The PEAP supplicant works with a software token program to
–
retrieve the one-time password. You have to enter only the PIN, not the one-time password. If
you check this check box, you must also select from the Supported Type drop-down box the
software token software that is installed on the client (such as Secure Computing SofToken
Version 1.3, Secure Computing SofToken II 2.0, or RSA SecurID Software Token v 2.5), and if
Secure Computing SofToken Version 1.3 is selected, you must locate the software program path
using the Browse button.
The SofToken Program Path field is unavailable if a software token program other than
Note
Secure Computing SofToken Version 1.3 is selected.
Chapter 6 for instructions on authenticating using PEAP.
Chapter 5 Configuring the Client Adapter
Step
Step 9, check one or both of the following check
Figure
9, go to Step 11.
5-19).
OL-1394-08