Download Print this page

Cisco Aironet CB20A Configuration Manual page 15

Wireless lan client adapters
Hide thumbs Also See for Aironet CB20A:

Advertisement

Chapter 5
Configuring the Client Adapter
Table 5-4
instructions in the table to change any parameters.
Table 5-4
Parameter
Antenna Mode (Receive)
Antenna Mode (Transmit)
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-08
lists and describes the client adapter's advanced infrastructure parameters. Follow the
Advanced (Infrastructure) Parameters
Description
Specifies the antenna that your client adapter uses to receive data.
Note
Note
Specifies the antenna that your client adapter uses to transmit data.
See the Antenna Mode (Receive) parameter above for information on
the options available for your client adapter.
Note
PC card—The PC card's integrated, permanently attached
antenna operates best when used in diversity mode. Diversity
mode allows the card to use the better signal from its two antenna
ports.
Options: Diversity (Both), Primary Antenna Only, Secondary
Antenna Only
Default: Diversity (Both)
LM card—The LM card is shipped without an antenna; however,
an antenna can be connected through the card's external
connector. If a snap-on antenna is used, diversity mode is
recommended. Otherwise, choose the mode that corresponds to
the antenna port to which the antenna is connected.
Options: Diversity (Both), Primary Antenna Only, Secondary
Antenna Only
Default: Diversity (Both)
PCI card—The PCI card must use the Primary Antenna Only
option.
Default: Primary Antenna Only
Mini PCI card—The mini PCI card, which can be used with one
or two antennas, operates best in diversity mode. Diversity mode
allows the card to use the better signal from its two antenna
connectors.
Options: Diversity (Both), Primary Antenna Only, Secondary
Antenna Only
Default: Diversity (Both)
This parameter is available only for 2.4-GHz client adapters.
The Primary Antenna Only and Secondary Antenna Only
options were formerly named Right Antenna Only and Left
Antenna Only, respectively.
This parameter is available only for 2.4-GHz client adapters.
Setting Advanced Infrastructure Parameters
5-15

Hide quick links:

Advertisement

loading

This manual is also suitable for:

Aironet 340Aironet 350