Haier AB072FDAHA Instruction Manual page 15

Operation Guide
2. Press ìFAN î button to select fan speed. The display changes in the following
sequence at each press on the button.
Mode FAN
3. Press ìTEMPî button to select desired temperature.
TEMP
The display changes in the above sequence at each press on
the button.
4. Power on
Press ìON/OFFî button.
Power off
Press ìON/OFFî button.
AUTO
LOU
HIGH
MED
LOW
Recommended temperature
Cooling
26~28*
Heating
22~24*
Running indicator lights
and running starts.
Running indicator goes out
and running stops.
Fan speed varied with indoor tempera-
ture under ìAUTOî mode.
ìFIXî mode will be displayed. when
using indoor unit of duct type which
does not allow change fan speed.
Temperature setting reduces 1 C with
one press on this button and changes
continuously if press is hold on.
Temperature setting increases 1 C with
one press on this button and changes
continuously if press is hold on.
In heat operation
Heat wind will be blown after preheat-
ing for 3~5 minutes.
In cool operation
Running starts after 1 minute or so.
In heat operation, blowing will continue
in 30 seconds or so after stoppage.
To protect the machine, compressor
will not start running until 3 minutes
later after restart after stoppage.
13