Operation Guide - Haier AB072FDAHA Instruction Manual

Operation Guide

Display
All content that can be shown on the display of remote controller are listed here to describe in details. In
practical use, only content selected can be shown.
Switch over of fan speed
1
Showing fan speed mode selected
Indoor unit
Duct type
Types other than
of duct type
Running mode
2
Showing selected running mode
Temperature setting
3
Showing selected temperature setting
check
4
Showing code of failure shooting
Showing number of indoor unit
with fault in display part of
temperature setting
TIMER
5
If timed running is set, display parts of ìpower
onî and ìpower offî will show ì TIME ON î and
ì TIME OFF î. If timed running is changed to
continuous, ì CONT î will display momentarily
then goes out.
Display of ìCENTRALî
Contents that can be operated with standard remote controller (YR-E02) and "CENTRAL"displays according
to setting of central controller during central management with centralized controller (YR-E01).
Setting of central controller
Normal control
Central control
Locked
Besides this standard circuit controller, ìTIMERî and ìcentral controllerî can also be used to practical
control as seen from operation manuals attached with each remote controllers.
Display of FAN
FIX
AUTO
HIGH
MED
LOW
"centralized" display of standard remote
controller
No display
"central "
"central " flashes
6
7
8
MODE FAN
AUTO CENTRAL
FAN ONLY
HIGH OPERATION
COOL
9
MED STANDBY
LOW PREHEAT
HEAT
FIX DEFROST
FILTER
TEMP CHECK LOUVER
DEMAND MANUAL
UNIT
çC
10
çF
CONT.OFF ON ADDRESS
TEMER
AFITER H M
11
12
13
Contents that can be operated with remote controller
Contents that can be operated with both standard
remote controller and central controller, the latest
setting works.
Only ìon/offî and "TIMED ON/OFF" can be operated.
Operation disabled.
10
Operation
Showing in operation.
Stand by
This is displayed when the machine can
not run as set mode while multiple in
door subassemblies are running
Preheating,defrost
This is displayed when preheating
or defrosting.
Filter
Clean air filter when this is displayed.
Central
This is displayed when using central
controller for central control mode.
Louver
Showing automatic swing.
Manual
This is displayed if Louver button is
pressed while function of automatic
swing is unavailable.
Demand
This is displayed when unit recieved
demand instuction.