Step 4: Power Supply - Ten-Haaft SunMover Installation Instructions Manual

Step 4: Power supply

Your SunMover® is supplied with a perfectly matched cable harness. Do not use any
other wiring except this cable harness to connect the system to the electric system
of your vehicle.
Rear of the vehicle
E
Elbow connector
Length 4 m from
external unit
Laderegler / Charge controller
Art. No. SR135TL
Batteriezustand
battery status
plug casing
security fixing
Length 5m
from branch
connection
Laden
charging
>75%
25 - 75%
<25%
Lastzustand
load status
SOLARA
Ignition
Pin 15 / D+
On-board battery
35
Driving direction
External unit
Assembly plate
Length 90cm from
branch connection
Western cable
SunMover
Operating control device
Note: Instead of the Solara
SR 135 charge controller,
you may also use an alter-
native charge controller of
your choice. The solar lines
(black, yellow) must never
be connected directly
to the battery. A charge
controller must always be
integrated in the line.