Video Signal Input And Output; Scart Description (Din En 50049) - Promax MC-377+ Instruction Manual

INSTRUCTION MANUAL MC-377+.

4.2.3 Video Signal Input and Output

The MC-377+ includes a scart for input/output of audio and video. The instrument
always supplies the video and audio signal received through the SAT input [19] or TV
input [21] by means of the output pins of this connector (see 4.2.3.1 Scart Description)
The external video and audio signal applied to input pins (see 4.2.3.1 Scart
Description) will be routed to the monitor and speaker if the instrument detects +12 V at
pin 8.

4.2.3.1 Scart Description (DIN EN 50049)

Also known as PERITEL connector (in conformity with standard NF-C92250). The
signals in this connector are the following:
PIN number
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Page 20
Figure 4.- Scart socket (external view)
SIGNAL
Right channel audio output
Right channel audio input
Left channel audio outpu
Audio grounding
Blue grounding (B)
Left channel audio input
Blue output (B)
Switching voltage
Green grounding (G)
Digital bus interface
Green output (G)
Digital bus interface
Red grounding (R)
Digital bus reserved
Red output (R)
Blanking signal
Composite video grounding
Blanked return
Composite video output
Video input
Connector shield grounding
CHARACTERISTICS
(not connected)
(not connected)
(not connected)
(not connected)
(not connected)
(not connected)
(not connected)
(not connected)
May 2001