Selecting The Mains Operating Voltage - Promax MC-377+ Instruction Manual

INSTRUCTION MANUAL MC-377+.

3.1.1 Selecting the mains operating voltage

This equipment requires a mains power source of 110-125-220 or 230/240 V AC 50
to 60 Hz. Mains operating voltage can be selected at the mains base.
1.- Pull out the fuseholder lid.
2.- Insert the fuseholder lid so the [A] pointer faces the desired mains voltage
display [B]
THE EQUIPMENT IS FACTORY SET FOR 220 V OPERATING VOLTAGE.
BEFORE SWITCHING ON THIS INSTRUMENT, SET THE VOLTAGE SELECTOR TO
THE PROPER POSITION AND BE SURE THAT THE FUSE VALUE IS ACCORDING
TO THE MAINS VOLTAGE.
AVOIDING THESE DIRECTIONS COULD DAMAGE THE EQUIPMENT.
Page 12
Figure 1.- Selection of mains voltage.
CAUTION
May 2001