Vaillant auroMATIC 560 Operating And Installation Manual page 67

Fig. 5.6 Connection diagram for hydraulic plan 1 Incorporation
of auroMATIC 560 into monovalent systems
H Danger!
Risk of overheating!
When incorporating the controller, install a
thermal mixer valve as a matter of principle to
limit the maximum temperature and protect
against scalding and to protect the equipment.
Set it to, e.g., 60 °C, depending on the boiler.
h Note!
The VED E Solar monitors the inlet temperature
independently and switches on the reheating of
the hot water depending on the solar cylinder
temperature. An additional control command is
not required for this.
Installation Manual auroMATIC 560 0020060907_00
Electrical installation 5
F 1
T4
230V Netz
Kol 1-P
Kol 2-P / ZP
LEG/BYP
EP
LP/UV 1
VRS 560
C1 C2
Kol 1
Sp 1
Sp 2
Sp 3
Ertrag
Kol 2
GB
11