Wiring As Per The Hydraulic Plan - Vaillant auroMATIC 560 Operating And Installation Manual

Caution!
a
An optional electric heating element (EP) must
be fitted with an additional relay or contactor
with a circuit-breaking capacity of at least 16 A.
Never connect an electric heating element to
the auroMATIC 560 without an additional ex-
ternal relay or contactor.
Caution!
The C1/C2 contact is a 24 V low-voltage con-
tact and may not under any circumstances be
used as a 230 V switching contact.
5.1

Wiring as per the hydraulic plan

To simplify installation there are three hydraulic plans
stored in the controller, from which the one most appro-
priate to the system configuration must be selected.
The hydraulic plans each show a possible system config-
uration in which some system components are optional.
Caution!
a
These hydraulic plans are only schematic repre-
sentations and cannot be used for the prepara-
tion of the hydraulic piping.
Hydraulic Bivalent cylin-
plan der
X
1
2 X
3 X
Table 5.1 System configuration
Installation Manual auroMATIC 560 0020060907_00
Monovalent cyl- Number of col-
inder lectors
1
X 1
2
1
Electrical installation 5
Circulation Solid fuel boiler
pump incorpo- incorporated
rated
Yes No
No No
No No
No Yes
2nd cylinder
or swimming pool
incorporated
Yes
Yes
Yes
Yes
GB
5