Table of Contents
Advertisement
5.
Close the battery compartment.
Install the miniSD card
1.
Make sure your device is turned off.
2.
Open the battery compartment at the bottom of the
device.
3.
Insert the miniSD card into the card holder with its gold
contacts facing up and close the battery compartment.
To remove the miniSD card, press it to pop it out of the slot.
Install and charge the battery
New batteries are shipped partially charged. Before you start using your device, it is recommended
that you install and charge the battery.
To install the battery, open the battery compartment of the device and then insert the battery by
aligning the exposed copper part of the battery pack with the protruding copper conductor which
is on the inside-left side of the battery slot. Gently push the battery until it locks into place, push
the lock down and then close the compartment.
9
Advertisement
Table of Contents
