Table of Contents
Advertisement
10
Some batteries perform best after several full charge/discharge cycles. You can charge the battery
in two ways:
•
Connect your device directly to an electrical
outlet using the AC adapter.
•
Plug the sync cable to the USB port on your
PC and to the sync connector on your device.
When your device is turned off, charging is indicated by a solid amber light on the LED indicator.
When your device is turned on, charging is indicated by a solid amber light on the LED indicator as
well as a charging icon (
After the battery has been fully charged, the LED indicator becomes green and a full battery icon
(
) appears on the Today screen.
To remove the battery
If you need to replace the battery, follow the procedure below to remove the battery from the
device.
1.
Make sure your device is turned off.
2.
Open the Battery compartment at the bottom of the device.
3.
Pull up the silver-coloured lock on the battery.
4.
Draw out the battery from its slot.
) on the Today screen.
Advertisement
Table of Contents
