Table of Contents
Advertisement
No. Item
1
Navigation Control /
CENTER OK button
2
Notification LED 1
3
Touch Screen
4
Notification LED 2
5
Notification LED 3
6
Notification LED 4
7
OK Button
8
START Button
9
Web Browser /
VueFLO Button
10
Battery Compartment Open this compartment to insert the SIM/USIM card, miniSD™ card and battery.
11
Keyboard Copper
Connector
Function
Press this multi-directional control up, down, left, or right to move through menus and
program instructions; carry out the selection by pressing the CENTER OK button.
This LED shows battery charging status.
Tap the screen with the stylus to write, draw, or make a selection.
This LED shows the GSM/UMTS standby/network status (Green). and GPS indicator
(Red)
This LED shows the following:
•
A flashing Blue light for Bluetooth system notification of powered-up and ready to
transmit radio frequency signal.
•
A flashing Green light for Wi-Fi status.
•
When both Bluetooth and Wi-Fi are enabled, their lights flash alternately.
This LED shows messages and notifications.
Press to confirm your data entries, or to exit the program in use.
Press to open the Start menu.
Press to launch the Interner Exolorer Mobile or Opera Browser and automatically go
to the home page selected by default. Depending on the Web browser selected in
VueFLO settings, press this button to activate VueFLO when browsing the Web.
Attach the copper part of the keyboard to this to be able to use the keyboard. See
"Using the Hardware Keyboard" in Chapter 2 of the User Manual to learn how to attach
the keyboard to the main unit.
5
Advertisement
Table of Contents
