Cleaning Tips - Kärcher K 2.01 Manual

Hide thumbs Also See for K 2.01:
Table of Contents

Advertisement

Available languages

Available languages

Deck Cleaning
(with or without detergent). Pre-rinse
deck and surrounding area with fresh
water. If using Kärcher Deck Wash, ap-
ply to surface at low pressure. For best
results, limit your work area to smaller
sections of approximately 25 square
feet. Allow Deck Wash to remain on sur-
face 1-3 minutes. Do not allow deter-
gent to dry on surface. Rinse at high
pressure in a long sweeping motion
keeping the spray nozzle approximately
3-6 inches from the cleaning surface.
Always clean from top to bottom and
from left to right. When moving on to a
new section of the cleaning surface, be
sure to overlap the previous section to
eliminate stop marks and ensure a more
even cleaning result.
CAUTION
Do not use rotating jet on wood surfaces
as it may cause damage.
House Siding
(with or without detergent). Pre-rinse
cleaning surface with fresh water. If us-
ing Kärcher Pressure Wash, apply to
surface at low pressure (for best results,
limit your work area to sections of ap-
proximately 6 feet and always apply de-
tergent from bottom to top). Allow
Pressure Wash to remain on surface 1-
3 minutes. Do not allow detergent to dry
on surface, if surface appears to be dry-
ing, simply wet down surface with fresh
water. If needed, use special wash
brush attachment to remove stubborn
dirt. Rinse at high pressure from top to
bottom in an even sweeping motion
keeping the spray nozzle approximately
6 inches from the cleaning surface.
12
English

CLEANING TIPS

CAUTION
Do not use rotating jet on siding as it
may cause damage.
Cement Patios, Brick and Stone
(with or without detergent). Pre-rinse
cleaning surface with fresh water. If us-
ing Kärcher Pressure Wash or Degreas-
er, apply to surface at low pressure. For
best results, limit your work area to
smaller sections of approximately 25
square feet. Allow Pressure Wash or
Degreaser to remain on surface 1-3
minutes. Do not allow detergent to dry
on surface. Rinse at high pressure in a
sweeping motion keeping the spray
nozzle approximately 3-6 inches from
the cleaning surface. Always clean from
top to bottom and from left to right. For
removing extremely stubborn stains,
use the rotating jet.
(with or without detergent). Pre-rinse
vehicle with fresh water. If using Kärcher
Vehicle Wash, apply to surface at low
pressure. For best results, clean one
side of vehicle at a time and always apply
detergent from bottom to top, do not al-
low detergent to dry on surface. If need-
ed, use special wash brush attachment
to remove stubborn dirt. Rinse at high
pressure in a sweeping motion keeping
the spray nozzle approximately 6-8 inch-
es from the cleaning surface (distance
should increase when rinsing pin-striping
or other sensitive surfaces). Always
clean from top to bottom and from left to
right. For best results, wipe surface dry
with a chamois or soft dry cloth.
CAUTION
Do not use rotating jet on vehicles as it
may cause damage.
Cars, Boats & Motorcycles

Advertisement

Table of Contents
loading

Table of Contents