Activesync - HP iPAQ rz1700 series User Manual

ActiveSync

To learn how to use Microsoft ActiveSync, see
"Synchronizing with Your Computer."
Problem
I cannot connect
to my computer
using the sync
cable.
I connected my
HP iPAQ before
installing
Microsoft
ActiveSync.
User's Guide
Solution
■
Be sure you have installed Microsoft ActiveSync 3.7.1
or higher on your computer before connecting the HP
iPAQ to it.
■
Be sure your HP iPAQ is connected to the sync cable
and the cable is connected to your computer.
■
Be sure your HP iPAQ is securely connected and
making good contact with the sync cable connector.
■
Be sure you are running Microsoft Windows 98SE, Me,
2000, or XP, and you have installed Microsoft
ActiveSync 3.7.1 or a later version on your computer.
Also, be sure you are connecting directly to a USB port
on your computer and not through a USB hub.
■
Uninstall and reinstall ActiveSync.
■
If you run personal firewall software, disable it. If you
are then able to synchronize, see the firewall software
documentation for information on how to make
ActiveSync to bypass the firewall.
1. Disconnect the HP iPAQ from your computer.
2. On your computer running Windows 98 or 2000, click
Start > Settings > Control Panel > System. The
Device Manager opens automatically. Locate and select
the "unknown" USB device record and click Remove
(Uninstall in Windows 2000).
3. Restart your computer and allow it to detect the USB
device.
4. Install Microsoft ActiveSync 3.7.1 or higher.
5. Reconnect the HP iPAQ to the computer.
Troubleshooting
Chapter 2,
(Continued)
9–4