Automatically Connecting To A Network; Manually Entering New Network Settings - HP iPAQ hx4700 Frequently Asked Questions Manual

Note:
turned on, it does not necessarily mean a connection has been
established with another device or access point.
If Wi-Fi is off, the Wi-Fi icon turns from green to gray.
Battery Saving Tip: Turn Wi-Fi off when you are not using it.
When Wi-Fi is on, be sure one of the Wi-Fi power saving
modes is selected. Refer to "Powering Wi-Fi On or Off" in
the User's Guide for more information.

Automatically Connecting to a Network

1. If one or more broadcast networks are present, the Network
Indicator icon (
network you want to connect to, and then tap whether the
network connects to the Internet (does not use proxy settings)
or Work (uses proxy settings).
2. If you are prompted for a Network Key (WEP), enter it and
tap Connect. If you are not sure, contact your network
administrator.

Manually Entering New Network Settings

A wireless network can be added either when the network
is detected (the Network Indicator icon is showing in the
Navigation bar) or manually by entering setting information.
To manually add a wireless network:
1. Be sure Wi-Fi is on.
2. In the Navigation bar, tap the Connections icon (
Settings > Advanced tab > Select Networks button.
3. Enter or select the network name (or tap New) you want to
use to either connect to the Internet using an ISP or My Work
Network for work. Tap OK once completed.
4. Set up your Dialing Rules and Exceptions and press OK.
The next step is to set up your network interface cards.
Even though the indicator is blue to indicate Wi-Fi is
) appears in the Navigation bar. Tap the
or ) >
29