Table of Contents
Advertisement
You can make the following adjustments in the PIP/PAP Page:
PIP/PAP Page
PIP/PAP
Sub Source
Display Size
H-Position
V-Position
Factory Page
1 Press the ENTER button on the remote control to bring up the OSD menu.
2 Press the Down arrow button five times to highlight the Factory Page icon, and then press ENTER.
3 Use the Up and Down arrow buttons to highlight a setting and press ENTER.
4 Press the Left and Right arrow buttons to scroll through your options.
5 Press the Up and Down arrow buttons to select other settings on the Factory Page.
Or
Press the EXIT button to save the setting and return to the OSD menu.
6 Press the EXIT button to remove the OSD menu from your display.
36
Using the TV
Function
Turns on or off Picture-In-Picture and Picture-
And-Picture.
Select an input source to be displayed in
Picture-In-Picture or Picture-And-Picture mode.
Select a size for the PIP display.
Moves the PIP to the left and right on your
display.
Moves the PIP up and down on your display.
Options
•
PIP
•
PAP
•
Off
available sources
•
Small
•
Middle
•
Large
0 to 100
0 to 100
Advertisement
Table of Contents
