Page of 1

HP LC2640N Start Here

Hd ready lcd television.
Hide thumbs
   
HP LC2640N (26") HD Ready LCD Television
HP LC3040N (30") HD Ready LCD Television
Start Here
Identify the type of connectors your home
1
entertainment equipment uses, then go to the
corresponding step on this poster and follow
those directions. (Example: To connect a cable
or satellite set-top-box which connects via
S-video cabling, refer to step 6, Connect an
S-video device.)
Refer to the user documentation for advanced
connections.
Apply power to all components and then to
the TV.
Finally, refer to the section titled "First Time
Setup for Channels" in your user
documentation to finalize your TV setup.
Contents
HP LCD TV with stand
Speakerbars (2)
4
Documentation kit
Remote control
with AA batteries (2)
Speaker cables (2)
Antenna cable
AC power cable
DVI cable
VGA cable
Component cable
S-video cable
Composite cable
The information in this document is subject to change without notice.
8
© 2004 Hewlett-Packard Development Company, L.P.
Printed in
www.hp.com
Connectors are located on the back of the TV, under the back panel.
Attach Speaker Cables to TV
a
b
5
Connect a PC or Other
Device by DVI
DVI
9
Analog Video from PC
VGA
Remove rear door before making connections.
2
Connect Speaker Cables
6
Connect a Component
(YPbPr) Device
Device
Component Video Outputs
R
L
Y
Pb
Pr
10
Outdoor Antenna
Connection
Wall
Coaxial
Cable
Signal
3
Connect Subwoofer
(optional)
7
Connect an S-video
Connect a Composite
Device
S-video Outputs
11
Remote Control
Once the power cable is connected, turn on TV by
pressing PWR on the remote control.
Refer to the section in the user documentation titled
"First Time Setup for Channels" to complete TV setup.
Refer to the user documentation for advanced connections.
OUT
Composite Video Outputs
Turn On

Advertising

   Also See for HP LC2640N

   Related Manuals for HP LC2640N

This manual also for:

Lc3040n

Comments to this Manuals

Symbols: 0
Latest comments: