HP xp8010 series Reference page 14

RS-232 keyword listing
Keyword Parameters
Setup functions
LANG 0 to 9, ?
LSAV 0 to 1, ?
LHRS ?
THRS ?
POS 0 to 3, ?
VERS ?
14
(continued)
Description
Sets or queries the language used by the projector:
• 0 = English
• 1 = French
• 2 = Italian
• 3 = German
• 4 = unavailable
Note: Some firmware versions may not support all
languages.
Sets or queries the lamp saver status: 0 = disabled,
1 = enabled.
Queries the time (in tenths of hours) that the lamp has been
in use.
Queries the total time (in hours) that the projector
has been in use.
Sets or queries the projector's position:
• 0 = front table
• 1 = front ceiling
Queries the projector model number and firmware version,
and the connectivity module's model number and firmware
version. The notification takes this form:
*VERS="proj_model:proj_fw, mod_model:mod_fw"
where:
• proj_model = projector model number.
• proj_fw = projector firmware version.
• mod_model = connectivity module model number.
• mod_fw = connectivity module firmware version.
For example: *VERS="xp8010:1.04, L1837:1.03"
• 5 = Spanish
• 6 = Traditional Chinese
• 7 = Simplified Chinese
• 8 = Korean
• 9 = Japanese
• 2 = rear table
• 3 = rear ceiling
RS-232 protocol reference