HP xp8010 series Reference page 12

RS-232 keyword listing
Keyword Parameters
KEYH –50 to 50, +, –, ?
ASPT 0 to 3, ?
ZOOM 0 to 9, +, –, ?
PANH 0 to 100, +, –, ?
PANV 0 to 100, +, –, ?
SYNC None
FREQ –50 to 50, +, –, ?
12
(continued)
Description
Sets or queries the horizontal keystone:
• 0 = no keystone adjustment.
• 1 to 50: shrinks the right side of the display.
• –1 to –50: shrinks the left side of the display.
Sets or queries the aspect ratio:
• 0 = 1-to-1
• 1 = Best Fit
Note: All options may not be available for all input
sources.
Sets or queries the zoom level:
• 0 = no zoom.
• 1 to 9: progressively higher magnification.
Sets or queries horizontal panning of zoomed images:
• 0 (lower limit) = the left edge of the window aligns with
the left edge of the screen.
• 100 (upper limit) = the right edge of the window aligns
with the right edge of the screen.
Sets or queries vertical panning of zoomed images:
• 0 (lower limit) = the top edge of the window aligns with
the top edge of the screen.
• 100 (upper limit) = the bottom edge of the window
aligns with the bottom edge of the screen.
Automatically resynchronizes (auto-sync) the projector to
the active input source.
Note: The active input source must be VGA1, VGA2,
analog M1, or analog RGBHV.
Sets or queries the projector's timing relative to the active
input source.
Note: The active input source must be VGA1, VGA2,
analog M1, or analog RGBHV.
• 2 = Fill
• 3 = 16:9
RS-232 protocol reference