HP xp8010 series Reference page 13

RS-232 keyword listing
Keyword Parameters
TRK value, +, –, ?
VPOS value, +, –, ?
HIDE 0 to 1, ?
Audio functions
MUTE 0 to 1, ?
VOL 0 to 31, +, –, ?
TRB –6 to 6, +, –, ?
BASS –6 to 6, +, –, ?
BAL –50 to 50, +, –, ?
AIN 0 to 7, ?
INTSP 0 to 1, ?
RS-232 protocol reference
(continued)
Description
Sets or queries the synchronization of the projector to the
active input source.
Note: The active input source must be VGA1, VGA2,
analog M1, or analog RGBHV.
Sets or queries the vertical positioning of the projected
image: usable range is the maximum and minimum
allowed by the active input source.
Note: The active input source must be VGA1, VGA2,
analog M1, or analog RGBHV.
Sets or queries picture blanking: 0 = disabled,
1 = enabled.
Note: If the active input source is changed while picture
blanking is active (HIDE=1), the picture remains blanked.
Sets or queries audio muting: 0 = not muted, 1 = muted.
Sets or queries audio volume: 0 = off, 31 = maximum.
Sets or queries audio treble: –6 = minimum, 6 = maximum.
Sets or queries audio bass: –6 = minimum, 6 = maximum.
Sets or queries audio balance:
• –50 to –1: fade left
• 0 = centered
• 1 to 50: fade right
Sets or queries the audio input source:
• 0 = Auto
• 1 = VGA1
• 2 = VGA2
• 3 = Composite Video
• 4 = S-Video
Sets or queries usage of the internal speakers:
0 = disabled, 1 = enabled.
• 5 = Component Video
YPbPr
• 6 = RGBHV
• 7 = M1
13