Sharp TU-45GD1E Service Manual page 20

TU-45GD1E
LC-45GD1E
(LC-45GD1E)
1. Remove the Terminal Covers 1 .
2. Remove the four lock screws 2 and detach the Stand.
3. Remove the four lock screws 3 and detach the Bracket Covers.
4. Remove the four lock screws 4 and separate the Speaker Box from the set.
Disconnect SP wire (R) and SP wire (L).
5. Remove the twenty one lock screws 5 from Rear Cabinet, and detach the Rear Cabinet.
6. Remove the eight lock screws 6 from Center Angle, and detach the Center Angle.
7. Remove the KEY PWB
7-1. Remove the two lock screws 7 from Top Control Cover.
7-2. Remove the three lock screws 8 from the KEY PWB.
8. Remove the six lock screws 9 and detach the LCD Shield Case.
9. Remove the five lock screws 0 and detach the TMDS Shield Case.
Terminal Cover Top
Terminal Cover Bottom
Speaker Bracket
Bracket Cover
3
2
5
1
5
5
1
5
5
4
4 Speaker Bracket
3
Bracket Cover
Top Control Cover
7
Stand
KEY PWB
Rear Cabinet
SP Wire (R)
Center Angle
SP Wire (L)
Speaker Box
LCD Shield Case
9
TMDS Shield Case
P151
8
20
10
P2003
6