Bosch Professional GSA 18 V-LI C Original Instructions Manual page 14

14 | English
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
a)
(1) Saw blade
(2) Base plate
(3) Locking sleeve for saw blade
a)
(4) Battery
(5) Lock-off button for on/off switch
(6) On/off switch
(7) Worklight
a)
(8) Battery release button
(9) Handle (insulated gripping surface)
(10) Saw blade receptacle
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Reciprocating saw
Article number
Rated voltage
A)
No-load stroke rate n₀
Tool holder
Stroke
Max. cutting depth
– in wood
– in steel (unalloyed)
– pipe diameter
Weight according to EPTA-Pro-
cedure 01:2014
Recommended ambient tem-
perature during charging
Permitted ambient temperature
C)
during operation and during
storage
Recommended rechargeable
batteries
Recommended chargers
A) Measured at 20–25 °C with rechargeable battery
GBA 18V 4.0Ah.
B) Depends on battery in use
C) Limited performance at temperatures < 0 °C
Noise/vibration information
Noise emission values determined according to
EN 62841‑2‑11.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 82 dB(A); sound power level
93 dB(A). Uncertainty K = 5 dB.
1 609 92A 81E | (27.07.2022)
Wear hearing protection!
Vibration total values a
determined according to EN 62841‑2‑11:
Cutting boards with saw blade S 644 D:
a = 9 m/s
h,B
Cutting wooden beams with saw blade S 611 DF:
a
h,WB
(The specifications for cutting boards apply to a workpiece
thickness of 20 mm.)
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
GSA 18 V-LI C
To estimate vibration and noise emissions accurately, the
3 601 FA5 0..
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
V= 18
This may significantly reduce vibration and noise emissions
−1
min 0–3050
over the total working period.
SDS
Implement additional safety measures to protect the oper-
mm 21
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
mm 200
mm 16
Rechargeable battery
mm 100
B)
kg 2.3–3.3
Charging the battery
Use only the chargers listed in the technical data. Only
u
°C 0 to +35
these chargers are matched to the lithium-ion battery of
your power tool.
°C −20 to +50
Note: Lithium-ion rechargeable batteries are supplied par-
tially charged according to international transport regula-
tions. To ensure full rechargeable battery capacity, fully
charge the rechargeable battery before using your tool for
GBA 18V...
the first time.
ProCORE18V...
GAL 18...
Inserting the Battery
GAX 18...
Push the charged battery into the battery holder until it
GAL 36...
clicks into place.
Removing the Battery
To remove the rechargeable battery, press the battery re-
lease button and pull the battery out. Do not use force to do
this.
The rechargeable battery has two locking levels to prevent
the battery from falling out if the battery release button is
pressed unintentionally. The rechargeable battery is held in
place by a spring when fitted in the power tool.
(triax vector sum) and uncertainty K
h
2 2
, K = 1.5 m/s ,
2 2
= 8 m/s , K = 1.5 m/s .
Bosch Power Tools