Receiving An Infrared Beam - HP iPAQ rx1900 Supplementary Manual

Receiving an Infrared Beam

If you set your HP iPAQ to receive all incoming infrared (IR) beams, it
detects and notifies you of IR beams.
1.
Tap Start > Settings > Connections tab > Beam.
2.
Select the Receive all incoming beams check box.
3.
Be sure your HP iPAQ is turned on and within close range of the
device that is beaming the information.
4.
When prompted to receive an incoming beam, tap Yes to receive
the beamed information.
64