Control Panel - NEC MultiSync EA242WU User Manual

Parts Oame and Functions

Control Panel

Item
Detects the level of ambient lighting and the presence of a user, allowing the monitor to make adjustments to
1 Ambient Light Sensor
various settings resulting in a more comfortable viewing experience. Do not cover this sensor.
Human Sensor
Enters sub-menus in the OSD menu when the OSD menu is open.
2 INPUT/SELECT
Shows a switching menu for the input source when the OSD menu is closed.
You can directly change to the [L/B] (LOW BLUE LIGHT) mode by touching this key for 3 seconds or more when
the OSD menu is closed.*
Opens the OSD menu. Closes the OSD sub-menus and main menu. You can restore the saved settings in the
3 MENU/EXIT
[CUSTOMIZE SETTING] by touching this key for 3 seconds or more when the OSD menu is closed.
When the OSD menu is open, navigates through the OSD menu.
4 LEFT/RIGHT/
When the OSD menu is closed, touch one of the following keys to open the menu for the function indicated.*
UP/DOWN*
2
When the OSD menu is open, this key sends a reset command for the OSD settings.
5 ECO/RESET
When the OSD menu is closed, this key switches the [ECO MODE] status. You can set a mode from [OFF], [1]
and [2].*
Turns the monitor on and off.
6 ⏻
Indicates that the power is on or off.
7 Power LED
*1: When the [HOT KEY] function is [OFF], this function is disabled.
*2: Depending on the [OSD ROTATION] setting, [LEFT], [RIGHT], [UP] and [DOWN] key guides are displayed at the
1
key: [BRIGHTNESS]
key: [VOLUME]
1
Function
English−13
, , , keys differently (see page
1
42).