Optical Zoom; Digital Zoom - HP Photosmart R742 User Manual

Hp photosmart r742: user guide
Hide thumbs Also See for Photosmart R742:
Table of Contents

Advertisement

Optical zoom

Optical zoom moves the lens between wide angle (1x) and telephoto (3x).
While in
Picture Capture or
buttons on the Zoom lever to control zoom. Press
and
to zoom out.
NOTE:
You can set the optical zoom to the position you want
just before recording video clips. However, you cannot use
optical zoom while the video clip is recording.

Digital zoom

In digital zoom, the Image Display shows a yellow frame around the scene and the image
quality setting (MP value). As you zoom in, the scene expands to show what the camera
will capture, and the MP value decreases to indicate the resolution at which the scene
will be captured.
When capturing images using digital zoom, make sure that the MP value on the Image
Display is appropriate for the size at which you want to print the captured image. For MP
values and their recommended print sizes, see Image Quality under
Capture and Video Record menus" on page
To use digital zoom:
1. While in
maximum level, then release the lever.
2. Press and hold
zoom in too far, press
3. To return to optical zoom, press
NOTE:
Digital zoom is not available when recording video clips.
Video Record, use the
Picture Capture, press
until the image you want to capture fills the yellow frame. If you
.
.
to zoom in
15.
on the Zoom lever to optically zoom to the
"Using the Picture
Using zoom
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Photosmart r740 seriesL2508a

Table of Contents