Table of Contents
Advertisement
ID
Name
6
USB DEVICE
Installation and Wiring
Installation
Note:
Before installation, please ensure the device is disconnected from the power source.
Ÿ
Ÿ
During wiring, connect and disconnect the cables gently.
The height of installation should not exceed 2 meters from the ground.
Ÿ
Steps to install the device in a suitable location:
1. Attach the installation bracket to the enclosure using the screws provided in the package
separately.
2. The bracket is attached to the enclosure as shown.
3. Repeat steps from 1 to 2 for the other side of the unit.
4. Attach the brackets to the surface you want to hold the unit against using the screws
(provided by others).
Hall Technologies
June 8, 2022
Description
Connect to USB devices (e.g., keyboard, mouse, USB camera,
USB flash drive, etc.).
Note: USB ports support the USB 2.0 standard with a maximum
of 1.4A for the top two ports and 0.6A on the bottom two ports.
Before connecting a USB 3.0 device, ensure it is compatible
with USB 2.0.
Page 9 of 14
Advertisement
Table of Contents
