Table of Contents
Advertisement
ID
Name
5
RS232 DIP Switch
Rear Panel
ID
Name
1
12V
2
HDBT IN
3
RS232
4
HDMI OUT
5
AUDIO OUT
Hall Technologies
June 8, 2022
Description
Set the function of RS232 port.
PASS-THROUGH（Default）: RS232 port is used to RS232
commands pass-through over HDBT.
MCU: RS232 port is used to update its MCU firmware.
VS: RS232 port is used to update Valens firmware of transmitter
and receiver.
1
2
3
Description
Connect to the DC 12V power adapter provided.
Connect to HDBT OUT of the transmitter via a Cat 5e/6/6a/7
cable. With PoH OUT, the receiver can supply power to the
connected transmitter with PD module.
For RS232 pass-through or firmware upgrade and can be set
through DIP switch on front panel.
Connect to an HDMI display.
Unbalanced stereo audio output.
•
PASS-THROUGH: For audio pass-through from Audio IN
port on the transmitter to this port.
•
DE-EMBED: For audio de-embedding from the HDMI output.
4
5
6
Page 8 of 14
Advertisement
Table of Contents
