Introduction; Overview; Features - Hall Technologies DSCV-70-RX User Manual

Introduction

Overview

This product is an HDBT 2.0 receiver that is designed to work with an HDBT wall plate transmitter,
reliably extending UHD video, multi-channel audio, USB 2.0, RS232 signal and power up to
40m/131ft using a single Cat 5e/6/6a/7 cable. With PSE module built-in, it can supply power to
the transmitter with PD module via a single power supply.
It supports USB 2.0 pass-through, providing a solution for users who need remote control of PC
resources sources such as keyboard, mouse, interactive display, or USB streaming devices over
distance. The RS232 port allows bi-directional RS232 serial communication and firmware
upgrade, the functions can be set via DIP switch.

Features

Ÿ Simple and cost-effective HDBT 2.0 receiver.
Ÿ HDMI 1.4 with 4K@60Hz (chroma sub-sampling 4:2:0 8-bit only) and HDCP 2.2 compliant.
Ÿ Transmits 4K@60Hz (YUV 4:2:0) signal up to 40m/131ft and 1080P@60Hz signal up to
70m/230ft via a Cat 6a/7 cable.
Ÿ Transmits 4K@60Hz (YUV 4:2:0) signal up to 35m/115ft and 1080P@60Hz signal up to
60m/197ft via a Cat 5e/6 cable.
Ÿ Supports analog audio pass-through from transmitter to receiver.
Ÿ Supports analog audio de-embedding for HDMI output.
Ÿ High-speed USB 2.0 pass-through over HDBT.
Ÿ Provide two high-current USB device ports to connect high-power USB device.
Ÿ Supports bi-directional RS232 serial communication to control a wall plate transmitter when
paired with the wall-plate transmitter.
Ÿ Supports firmware upgrade through the RS232 port.
Ÿ Built-in PSE to power remote HDBT Wall plate transmitter with PD module.
Hall Technologies June 8, 2022 Page 4 of 14