Table of Contents
Advertisement
Wiring
Warnings:
Ÿ Before wiring, disconnect the power from all devices.
Ÿ During wiring, connect and disconnect the cables gently.
Steps for device wiring:
1. Connect HDBT OUT of the wall-plate transmitter to HDBT IN of the receiver via a Cat
5e/6/6a/7 cable.
2. Connect an HDMI display (e.g., TV, LED/LCD display, projector, etc.) to HDMI OUT of the
receiver.
3. Connect audio devices (e.g., earphone, speaker) to De-embed and Pass-through ports of
the receiver.
4. Connect USB Devices to USB DEVICE of the receiver.
5. Connect the provided power adapter to the receiver, with PoH function, the receiver can
supply power for the wall-plate transmitter with PD module.
6. Connect video and audio sources to the wall-plate HDBT transmitter.
7. Connect a USB Host device to USB port of the transmitter.
8. Power on all devices.
Hall Technologies
June 8, 2022
Page 10 of 14
Advertisement
Table of Contents
