Clas Ohlson EMD300A-UK Quick Start Manual

Floor Dimmer Switch with adaptor plug
Art.no 18-2031
36-2823
Please read the entire instruction manual before use and save it for future reference. We reserve the right
for any errors in text or images and for making any necessary technical changes to this document. If you
should have any questions concerning technical problems please contact our Customer Services.
Safety
• This appliance is for indoor use only.
• Do not expose the dimmer switch to
moisture or splashing.
• Only connect the dimmer switch to appliances
rated for the same voltage according to
the specifications below.
• Never use the dimmer switch on appliances
that are not built for use with a dimmer switch.
Use only approved light bulbs etc.
• Remove the dimmer switch from the wall
socket to make sure that it is not conducting
any current.
Product Description
• Plugs directly into the wall socket
• Min/max power: 20–500 W
• 1.5 m cable
• Earthed
Buttons and Functions
1. Dimmer control
2. Lamp connection
3. Wall socket connection
GREAT BRITAIN • CUSTOMER SERVICE
tel: 0845 300 9799 internet: www.clasohlson.com/uk
e-mail customerservice@clasohlson.co.uk
Model EMD300A-UK
EMD300A
1
2
Installation & Use
1. Switch off the lamp that is to be connected.
2. Connect the dimmer switch to a wall socket.
3. Connect the light which is to be used to
the dimmer switch.
4. Switch on the light.
5. Adjust the intensity of the light using
the dimmer control (1).
Disposal
Follow local ordinances when disposing of this
product. If you are unsure about how to dispose of
this product contact your municipality.
Specifications
Mains supply
Power
Operating temperature 0 to 35 °C
Protection Class
Length of cable
Colour
3
230 V AC, 50 Hz
20–500 W light bulb
or 230 V halogen
IP20
1.5 m
Black