Function Buttons - Kenwood TCP05 Instructions Manual

Before using for the first time
(A)
- Clip excess cord into
l
the cord storage clips in the
7
base .
Operate the toaster once on
l
a medium setting without
bread. (The lever will not stay
down unless the toaster is
plugged in).
As with all new heating
l
elements, your toaster may emit
a slight burning smell when it is
first switched on. This is normal
and not a cause for concern.
Key
1 Carriage lever
2 Browning control
Defrost button with indicator
3
light
4 Reheat button with indicator
light
5 Cancel button with indicator
light
Crumb tray
6
7 Cord storage

Function buttons

Symbol Button and control function
Defrost Button
3
Defrosts and
browns frozen
bread
Reheat button
4
Cancel Button
5
English
To use your toaster
1 Plug the toaster into the
power supply.
2 Turn the browning control
until the line up mark aligns
with the desired setting. Use a
lower setting for light toasting
and for thin or dry bread.
3 Insert the bread, muffins,
bagels etc.
4 Lower the lever
(The lever will not stay down
unless the toaster is plugged
in). The 'cancel'
will illuminate.
5 Your toast will pop up
automatically.
• To toast frozen bread – select the
desired setting.
• Then lower the bread.
• Press the
will illuminate.
• Set the browning control to setting 1 if
you want to defrost the bread without
browning.
Use to warm toast that has popped up
but gone cold.
• lower the toasted bread
• then press the
button will illuminate.
• Press the
the cycle, the toast will pop up and the
button light will go off.
5
1
button and the button
button and the
to stop toasting during
(B)
until it locks.
button