Function Buttons - Kenwood TCM810WH Instructions Manual

function buttons

symbol Button and control function
Cancel Button
4
Defrost Button
Defrosts and
5
browns frozen
bread
Bagel Button
6
(C)
Warming
Rack setting
on browning
control
hints on using your
toaster
Select a lower setting for light
l
browning or for dry bread.
When toasting a single slice
l
of bread, you may notice a
variation in toast colour from
one side to the other - this
is normal.
Dry/stale bread toasts more
l
quickly than fresh bread and
thinly sliced bread toasts more
quickly than thickly sliced
bread. Therefore the browning
control should be set at a lower
setting than usual.
For best results ensure that
l
the bread slices are of an even
thickness, freshness and size.
English
• Press the
the cycle, the toast will pop up and the
button light will go off.
• To toast frozen bread – select the
desired setting.
• Then lower the bread.
• Press the
will illuminate.
• Set the browning control to setting 1 if
you want to defrost the bread without
browning.
• To toast bagels the cut face should be
facing the centre elements.
• Select the desired browning setting
and lower the carriage lever.
• Press the
illuminate.
• Note: when toasting using the
button, the centre elements will toast
with a higher heat than the element at
the front and back of the toaster. This
will result in only one side of the item
being toasted.
• Set the browning control no higher
than
when using the warming rack.
In order to achieve uniform
l
browning we recommend you
wait a minimum of 30 seconds
between each toasting so that
the control can automatically
reset. Alternatively select a
lower setting when additional
toasting is carried out.
to use the warming
rack
1 Place the warming
top of toaster.
2 Put your bread items on top of
the rack (slicing thick items in
half will speed up the warming
process).
3 Set the browning control
no higher than
the lever.
6
to stop toasting during
button and the button
button and it will
(if supplied)
1
rack on
. Lower