Function Buttons - Kenwood TCM810 Instructions Manual

function buttons

symbol Button and control function
Cancel Button
4
Defrost Button
Defrosts and
5
browns frozen
bread
Bagel Button
6
(C)
Warming
Rack setting
on browning
control
hints on using your
toaster
Select a lower setting for light
l
browning or for dry bread.
When toasting a single slice
l
of bread, you may notice a
variation in toast colour from
one side to the other - this
is normal.
Dry/stale bread toasts more
l
quickly than fresh bread and
thinly sliced bread toasts more
quickly than thickly sliced
bread. Therefore the browning
control should be set at a lower
setting than usual.
For best results ensure that
l
the bread slices are of an even
thickness, freshness and size.
English
• Press the
the cycle, the toast will pop up and the
button light will go off.
• To toast frozen bread – select the
desired setting.
• Then lower the bread.
• Press the
will illuminate.
• Set the browning control to setting 1 if
you want to defrost the bread without
browning.
• To toast bagels the cut face should be
facing the centre elements.
• Select the desired browning setting
and lower the carriage lever.
• Press the
illuminate.
• Note: when toasting using the
button, the centre elements will toast
with a higher heat than the element at
the front and back of the toaster. This
will result in only one side of the item
being toasted.
Set the browning control no higher
•
than
when using the warming rack.
In order to achieve uniform
l
browning we recommend you
wait a minimum of 30 seconds
between each toasting so that
the control can automatically
reset. Alternatively select a
lower setting when additional
toasting is carried out.
to use the warming
rack
1 Place the warming
top of toaster.
2 Put your bread items on top of
the rack (slicing thick items in
half will speed up the warming
process).
3 Set the browning control
no higher than
the lever.
6
to stop toasting during
button and the button
button and it will
(if supplied)
1
rack on
. Lower