Table of Contents
Advertisement
22
Adjustment and replacement
Compressor oil level
!
W710R059
W710R060
To check
1
Remove plug.
2
Turn compressor pulley by hand to reveal:
a. The inclination of the control plate.
b. The connecting rod, while looking through
the oil filler hole.
3
Position the chamfered face of the dip stick
against the body of the compressor.
Note
The dipstick must enter the compressor without
excessive constraint.
The value should be 6 graduations on the dipstick.
If required, adjust oil level to specified value.
4
Replace plug.
Advertisement
Table of Contents
