Table of Contents
Advertisement
20
Adjustment and replacement
Compressor drive plate
!
"
W710R063
#
W710R064
To remove
1
Remove compressor from car.
2
Attach peg spanner.
3
Slacken the central locking nut and remove.
4
Fit the extractor special tool.
5
Extract the drive plate.
To fit
Fit in reverse order.
Note
Fit the old nut and tighten to 3,5-4 mdaN.
Check and adjust the air gap if required.
Fit a new nut in place of the old one and
tighten to 3,5-4 mdaN.
Advertisement
Table of Contents
