Table of Contents
Advertisement
If required, you can select other settings and re-
‒
start the operation.
When the food is ready, use
‒
pliance off.
11 Dishes
The "Dishes" operating mode helps you to use your ap-
pliance to prepare different meals by selecting the op-
timum settings automatically.
11.1 Cookware for dishes
The cooking result depends on the composition of the
meat and the size of cookware.
You should therefore use heat-resistant cookware that
is suitable for temperatures up to 300 °C. Glass or
glass ceramic cookware is best. The joint should cover
approx. 2/3 of the cookware base.
Cookware made from the following material is not
suitable:
¡ Bright, shiny aluminium
¡ Unglazed clay
¡ Plastic or plastic handles
Note: For some dishes, the appliance switches on the
microwave. A notification appears in the display stating
that you should use cookware that is suitable for mi-
crowave use.
→ "Cookware and accessories with microwave",
Page 15
11.2 Setting options for the dishes
To cook the dishes perfectly, the appliance uses differ-
ent settings depending on the dish.
The display shows you the settings that are used. You
can adjust certain settings. Follow the instructions on
the display.
Note: The cooking result depends on the quality and
composition of the food. Use fresh and, ideally, chilled
food. Use frozen food straight from the freezer.
Tips and information about the settings
If you set a dish, the display shows relevant information
for this dish, e.g.:
¡ Suitable shelf position
¡ Suitable accessory or cookware
¡ Added liquid
¡ Time for turning or stirring
When this time is reached, a signal sounds.
To call up the information, press . Some notes are
displayed automatically.
Programmes
The ideal type of heating, temperature and cooking
time are preset for programmes.
To achieve an optimal cooking result, you must also
set the weight, thickness or the cooking level. You can
set the weight only in the intended range.
Unless otherwise indicated, set the total weight for your
dish.
to switch the ap-
Changing added microwave
You can change or deactivate the added microwave at
any time.
Press the microwave output setting.
1.
Change or deactivate the microwave output setting.
2.
Press "Apply".
3.
11.3 Overview of the dishes
You can see which individual dishes are available to
you here.
Note: In the basic settings, you can regionally special-
ise the displayed dishes.
→ "Basic settings", Page 18
Dishes
¡ Pizza with thin base, x 1
¡ Lasagne
¡ Chicken, unstuffed
¡ Chicken portions
¡ Meat loaf made from fresh mince
¡ Steam fish fillet
¡ Vegetables, fresh
¡ Vegetables, frozen
¡ Baked potatoes, whole
¡ Boiled potatoes
¡ Long-grain rice
¡ Defrosting poultry portions
¡ Defrosting meat
¡ Defrosting fish fillet
11.4 Setting a dish
Requirement: The dish is in the cooking compartment.
Press "Dishes".
1.
Press the required category.
2.
Press the required food.
3.
Press the required dish.
4.
Tip: For some dishes, you can select a preferred
cooking method.
→ "Setting options for the dishes", Page 17
a The settings for the dish appear on the display.
Adjust the settings if required.
5.
You can adjust only certain settings depending on
the dish.
→ "Setting options for the dishes", Page 17
6.
For information about the accessory and shelf posi-
tion, for example, press .
Use
to start the operation.
7.
a The appliance starts to heat and the time counts
down.
a Once the dish is ready, a signal sounds. The appli-
ance stops heating.
Once the cooking time has elapsed:
8.
If required, you can select other settings and re-
‒
start the operation.
When the food is ready, use
‒
pliance off.
Dishes en
to switch the ap-
17
Advertisement
Table of Contents
