Conventional fire detection & gas extinguishing control panel (60 pages)
Summary of Contents for FireClass Lite 1.0
Page 1
® FireClass Lite FireClass Addressable Fire Alarm Control Panels version 1.0 Product Information and Design Application 120.515.093 Doc. version 1.0 25. April 2012...
Page 2
No portion of this documentation, including the online help, may be reproduced, edited, copied or distributed in any form without prior written authorization from FIRECLASS. Use of the data medium provided with this product is restricted to cop- ying the software for the purpose of data backup only.
FireClass Fire detection system FireClass Panels Contents Contents Guide through this manual .................... 5 Keywords and symbols ........................5 Helpful information ........................5 Purpose............................5 Who this guide is for ........................5 Reference Documents ........................5 Control Panel and Associated Housing................ 6 Key Functions and Features ......................6 2.1.1...
Page 4
Contents FireClass Fire detection system FireClass Panels Product Information and Design Application Doc. version 1.0...
Explanation DANGER Warning. Purpose Imminent danger. This document describes features of the FireClass Lite 1 Death or severe injury when Loop 125 device panel. This document provides an over- disregarded. view of the features and the functionality provided by the WARNING Warning.
FireClass Lite Express The FireClass Lite supports only repeaters on RBUS and It is a new template to support FireClass Lite. It is included does not support other RBUS ancillaries. in the FireClass Express installer. The FireClass Lite Express The FireClass Lite is limited in firmware to support 125 ...
Page 7
FireClass Fire detection system FireClass Panels 2.2 FireClass Lite Express 162.5 162.5 Fig. 1: Overall and Fixing Dimensions – FireClass Lite 1 –Knockouts Ø 20 mm (26x) 2 –Knockout Ø 25 mm 3 –Knockout Ø 20 mm 4 –Knockouts 5 –Mounting hole Ø 5.5 mm (3x)
Page 8
FireClass Fire detection system FireClass Panels The block schematic for the FireClass Lite panel is as shown in Fig. 2. Fig. 2: Typical Fire Detection and Alarm System using FireClass Lite Fire Alarm Control Panel Product Information and Design Application Doc. version 1.0...
Page 9
FireClass Fire detection system FireClass Panels 2.2 FireClass Lite Express OV V C:\FC_Serv_ Housing wit Housing wit POWER CPU board fixed over FIM800 Fig. 3: Differences between FIM801 and FIM801 Lite board indicated by cross marks Components indicated by cross marks are not present on the FIM801 Lite board.
2.2 FireClass Lite Express FireClass Fire detection system FireClass Panels 2.2.1 FIM Connection Details All terminals accept solid/stranded conductors from 0.5 to 2.5 mm Fig. 4 shows the FIM801 Lite board connections. ALARM FAULT SDR1 2.7 kOhms 2.7 kOhms SDR2 Fig.
FireClass Fire detection system FireClass Panels 2.3 Summary Summary The FireClass Lite panel details are summarized as below: Values are shown as default/maximum Panel Number of Points * Points Zones per Zones per Zone Batteries addressable per loop per CIE...
28.6 VDC output from the power supply unit is fed to screw hole positions are shown in Fig. 1: “Overall and Fixing the input of the PMM800. Dimensions – FireClass Lite” on page 7 . Output Table 7 shows the 3 DC output rails voltage ranges: 2.4.8...
2.6 Unavailable Features for FireClass Lite 2.5.3 Display and Control Module with the panel. The DCM for FireClass Lite is shown in Fig. 5. The Display and Control Module (DCM) contains the dis- play, indicators and keys, that the operator uses to interact Fig.
Page 14
United Kingdom FIRECLASS Hillcrest Business Park Cinder Bank Dudley West Midlands DY2 9AP United Kingdom FireclassSales@tycoint.com www.fireclass.co.uk Further information about FIRECLASS can be found on the Internet at www.fireclass.co.uk Company stamp...