hepco & becker 506000 Quick Start Manual

hepco & becker 506000 Quick Start Manual

Mounting set street / royster for tank bags & rear bags with locking unit

Advertisement

MONTAGESET STREET / ROYSTER
FÜR TANKRUCKSÄCKE & HECKTASCHEN
mit Verschlusseinheit
MOUNTING SET STREET / ROYSTER
FOR TANK BAGS & REAR BAGS
with locking unit
Art.Nr./Item-no.:
506000
Inhalt
1x
Verschlusseinheit ohne Magnetdome
1x
Zugband 60 cm
1x
700012745 Schraubensatz:
4x Linsenschraube M5x20
4x U-Scheibe Ø5,3
4x Karosseriescheibe Ø5,3xØ15mm
4x Selbstsichernde Mutter M5
4x Klebepads
Hinweis / Notice:
Dieses Set dient zur Umrüstung eines Tankrucksacks auf einen vorhandenen Lock-it Tankring oder zur Montage einer
Hecktasche auf einem Rack mittels Lock-it Pfeiladapter.
Dome und Verschlusseinheit düfen nur in dem von Hepco&Becker geprüten Satz verbaut werden. Eine optimale Befesti-
gung kann nur mit den dazugehörigen Tankrucksäcken / Hecktaschen von Hepco&Becker garantiert werden, da diese
mit einer speziell verstärkten Bodenkonstruktion ausgelegt sind! Wir empfehlen, die Montage der Verschlusseinheit von
Ihrem Fachhändler durchführen zu lassen!
This set is used to convert a tank bag to an existing Lock-it tank ring or to mount a rear bag on a rack using a Lock-it
arrow adapter.
The domes unit and lock unit must only be installed into sets approved by Hepco&Becker. Optimum fastening can only
be guaranteed with the corresponding Hepco&Becker tank bags / rear bags since they are designed with a specially
reinforced base! We recommend you have your local specialist dealer install the lock unit onto the tank bag!
Vor der Tankring Montage den Tankring von der Verschlusseinheit durch kräftiges ziehen des Verschlussriegels trennen.
Hinweis: Nicht die Schrauben der Magnete lösen!
Before fitting the tank ring, separate the tank ring from the locking unit by pulling the locking latch firmly.
Note: Do not loosen the screws of the magnets!
Ansicht von oben: / View from top:
Montagevideo /
Mounting video:

Content

1x
locking unit without magnetic dome
1x
tie belt 60cm
1x
700012745 screw kit:
4x filister head screw M5x20
4x washer Ø5,3
4x body washer Ø5,3xØ15mm
4x self-nock nut M5
4x adhesive pads
506000
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 506000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for hepco & becker 506000

  • Page 1 Verschlusseinheit MOUNTING SET STREET / ROYSTER FOR TANK BAGS & REAR BAGS with locking unit Montagevideo / Art.Nr./Item-no.: Mounting video: 506000 Inhalt Content Verschlusseinheit ohne Magnetdome locking unit without magnetic dome Zugband 60 cm tie belt 60cm 700012745 Schraubensatz:...
  • Page 2 Stoffabdeckung (oder Innensack durch öffnen des Reißverschlusses) seitlich wegklappen und bohren (Ø5mm). Vorsichtig bohren! Gefahr der Beschädigung! Fold away the fabric cover (or inner bag by opening the zip) to the side and drill (Ø5mm). Drill carefully! Risk of damage! 506000...
  • Page 3 Weiteres Zubehör für dieses Modell auf www.hepco-becker.de / More accessories for this model see www.hepco-becker.de HEPCO&BECKER GmbH | An der Steinmauer 6 | 66955 Pirmasens | Germany | Tel. +49 6331 1453100 | Fax: +49 6331 1453 120 | Mail: vertrieb@hepco-becker.de 506000...

Table of Contents