Table of Contents
Advertisement
3. Upon powering, the device will begin setting itself up. This should take around 30
seconds. The indicator light will then start flashing and the voice prompt, "Ready to
be connected" will be heard. The device is now ready to connect to the Kogan
SmarterHome™ app.
Using the wall mount
If you would like to hang the treat dispenser on a wall, use the provided wall mount.
•
Peel the adhesive off the back of the wall mount and stick the wall mount in the
desired position. Secure the treat dispenser onto the wall mount with the wall hooks.
Note:
It is recommended the treat dispenser be located about 1.2m above the ground.
This ensures pets do not touch the treat dispenser and allows the best viewing
angle for the camera.
7
Advertisement
Table of Contents
